Floor Nailer

<

I have a pneumatic floor nailer that has stopped working, no longer the staples out. Any ideas on why?

It seems that the air compressor isn't reach the chamber to force the staple, but doesn't seem as if the air is his escape. It is the compressor, either because my Brad nailer works well. It seems that the air compressor to get the camera isn't to force the staple, but doesn't seem as if the air is his escape. It is the compressor, either because my Brad nailer works well. I have added, yes I have seen basic food, there is no jam, and there are staples in there. The best I can say is that it seems that the air escapes because its not get where you need to push out the staple food. I did not hear or feel any air leakage. When I hit the barrel of the gun, it doesn't give the same sound or the reaction it did when their work.

1. Make sure you have the nails in the gun:) 2. It may be stuck 3. Take all the nails, oil up, and shoot until the oil stops spraying out (the aim is to finish in a section of floor) and try again